Product No : LW-8230
Product Introduction
Faceplate routing can be done with square to face of door or on a 3 degree bavel-changeover time is approximately 15 seconds.
- Self-centering clamp automatically compensates for different door thickness.
- Quick change setups for different sizes and depths of mortise.
- Easy setup of centerline for mortises.
- Faceplate router uses no templates.
- Length of faceplate mortise easily changes with a simple hand crank while faceplate is used to set stops.
- Quick setup using turret, which controls width for four settings while adjustable stop is used for fine tuning the fit of the plate.
- Programable logic controller-safety, reliability, quick trouble shooting.
- Infinite adjustment capacity using adjustment bolts.
- Faceplate routing can be done with square to face of door or on a 3 degree, bevel-changeover time is approximately 15 seconds.
- Door greater than 8' - 0"
- Cycle time varies with lock size and material type-typical cycle time is 1-1/2 minutes.
- Minimum Order : Negotiable
- TEL: 886-4-25284431 / 886-4-25204443 / 886-4-25235406
- FAX: 886-4-25289411 / 886-4-25273423
